Titanium alloy has high strength, good corrosion resistance and high heat resistance. It is mainly used for the production of aircraft engine compressor parts, followed by the structural parts of rockets, missiles and high-speed aircraft.As the leading manufacturer of CNC machining titanium parts for over 25 years, Worthy Hardware is well equipped with 35 sets CNC Machines, including 3 sets 5 axis ,4 sets 3 axis, 12 sets turning and milling compound.These machines could allow us to make prototypes, small batch and mass production parts for titanium materials.


What is CNC Machining Titanium?

Titanium alloys are widely used in various industries because of their high strength, good corrosion resistance, and high heat resistance.To get the most accurate and affordable titanium parts, CNC machining is almost always the best manufacturing technique.


What are the benefits of CNC Machining Titanium?

1) High thermal strength:the operating temperature is several hundred degrees higher than aluminum alloy,then it could work for a long time at a temperature of 450 to 500°C.

2) High strength: 1.3 times higher than aluminum, 3.5 times of stainless steel.

3) Good low temperature performance: it can maintain a certain degree of plasticity at -253°C.

4) Good corrosion resistance: acid resistance, alkali resistance, atmospheric corrosion resistance, particularly strong resistance to pitting corrosion and stress corrosion.

Because of its light weight, high strength and high temperature resistance, it is especially suitable for manufacturing the parts for aerospace. Also it requires very precise tolerances for titanium parts, then cnc machining is the best way to reach it.


CNC Machining Titanium Material

Titanium Grade 5

Titanium Grade 5 Stronger than Grade 2, equally corrosion-resistant, and excellent bio-compatibility.Titanium alloy density is generally around 4.5g/cm3, only 60% of steel, titanium strength is only close to the strength of ordinary steel, some high strength titanium alloy exceeds the strength of many alloy structural steel

Chemical Composition

C % N % H % O % Fe % Ni %
0.08~0.13 ≤0.05 ≤0.015 ≤0.40 ≤0.050 Balance


Worthy Hardware Advantages

When you source the CNC Machining shops from the world, there are huge numbers of CNC machining service providers. Why you should choose Worthy Hardware as your trust vendor?

CNC machining

Advantage 1: Comprehensive Capabilities

As the leading manufacturer of CNC machining for over 25 years, we are well equipped with 35 sets CNC Machines, including 3 sets 5 axis ,4 sets 3 axis, 12 sets turning and milling compound. These machines could allow us to make prototypes, small batch and mass production parts. The fastest delivery time is 3 working days.

CNC machining

Advantage 2: Rich Experience

Our engineers and production workers have at least 15 years of CNC Machining experience, So we are responsible for various complex types of precision parts. We are very strong in making the tough materials, such as tool steel, alloy steels, SS316.

CNC machining

Advantage 3: Strict Quality

As the ISO 9001:2015, certified quality management system, all the team, material and machines are in regular status of quality assurance, we make it correct at the first time not only to ourselves, but also to our customers. We check and maintenance the machines everyday except the holiday time. In the production stage including the samples, the production workers check the dimensions frequently, and then the production manager will check the dimension again, finally our QC department will make the final checking with CMM. We make the 100% inspection for the parts, especially for the thread and surface.

CNC machining

Advantage 4: Stable Employees

80% of the workers in Worthy Hardware have worked here for more than 12 years, and most are home fellows. They're settled down in Donguan already. Therefore, we can be assured that quality and delivery time will not fall apart anytime soon because we've already been through all these hardships together as one family!


Customer Testimonials

In the past 25 years, our clients are all over the world, including the world's top 500 companies such as Jabil, ABB, Medtronic and so on. Do you want to know what our customers say about us? Let's take a look.

Justin, CEO of a lighting company

I inspected the top two pieces of all five boxes. Everything is beautiful! BEAUTIFUL! You remove so much stress from my shoulders. I know that when we pay you to manufacture a product, it will be made perfectly. The glass bead blasting and anodizing is always beautiful. I am so very happy! You make it easier for us to run our business. There is no trouble! With most factories, I have a moment of fear before I open their boxes. Will the components be made correctly? Do they care about quality? It is often a war. And Dennis has to fight the war, treating most factories like small children! But, not your company. You’re company is world-class. You make beautiful components!Thank you very much for your hard work. We will work together for many lifetimes!

David, General manager for a family owned business

I’ve been working with Chinese manufacturers since 2004 and had some really unfortunate partnerships until 2012 when we partnered with Worthy Hardware. At first,we only gave them small orders to test and make the start. However,their response speed was very fast ,and their engineers help us improved our designs more simple, this helped us reduce a lot of cost.Our cooperate is more and more stable! We trust Worthy Hardware always ,very responsible. Your guys are great! .Worthy Hardware is by far my favorite, because of the way they handle business and the quality of what they make.If you are from USA and would like to know more about Worthy Hardware,i would be very happy to be as an endorsement.


CNC Machining Titanium FAQ

1.What is the best grade of titanium?

The Grade 5 was successfully developed by the United States in 1954.Because of its good heat resistance, strength, plasticity, toughness, formability, weldability and corrosion resistance and biocompatibility, Grade 5 is the best grade of titanium.

2.Why is titanium difficult for CNC machining?

The thermal conductivity of titanium is very low, only 1/7 of steel and 1/16 of aluminum. Then the heat generated in the process of machining ,will not be quickly transferred to the work-piece or taken away by the chips.They will gather in the machining area, the temperature can be as high as 1,000 ℃ or more. Such high temperatures will damage the cutting tool ,further shortening the life of the tool.


CNC Machining Titanium Projects

cnc partscnc machining
cnc machiningcnc machining
cnc partscnc machining
cnc partscnc machining
cnc partscnc machining
cnc partscnc machining
cnc partscnc machining
cnc partscnc machining